Appliance Repair Tips

Appliance Repair Tips

Household repair

Below are some tips on how to repair your device.

TV repair.

How to do flat screen TV repair. Listed below are common errors with flat screen TVs, there will also be a selection of repair videos that will help you diagnose errors.

  1. No sound

First check your audio settings. Most modern televisions have additional audio outputs, and these can sometimes be set on headphones or any other output. Make sure they are set to speakers or the correct output, this is a good and fast TV repair. It may seem quite simple, but I have been called for some jobs with this basic problem. If you still have problems, check your inputs to make sure everything is properly installed and you have no loose connections.

  1. The TV set will not turn on.

Now it may seem obvious, but check your power switch! Ive had it several times than I care to count, some televisions have a nice EcoMode switch which in practice is a glorified on / off switch. Make sure these are checked before you spend too much time looking for the error.

  1. Poor picture.

This may range from blinking to missing half of your image or simply a small output from the screen. Wrong as its usually not a simple TV repair to do yourself.

Drying machine and washing machine repair

Washing machine repair and dryer repair is a great skill. Washing machines and tumble dryers are important for our daily lives. If your start to start acting or if you lose confidence then check out here for some tips!

  1. The washing machine will sometimes not rotate.

This is a common problem usually caused by an unbalanced load. The washing machine slowly rotates the drum and tries to balance the load inside. If the machine can not balance the load, it will not enter a spin cycle! Try a smaller load with different items.

  1. My dryer will not heat up.

It may be overheating at the back of the machine has tripped. Pull out the machine and find a small button that can be pushed in. Press it and see if the machine starts to heat. If the machine does not heat, please contact us as this may be a problem with the heating element.

  1. My washing machine will not drain.

Check your drain pump at the bottom of the machine. Get a bowl and towel ready because the water inside the machine will leak out. Clear any blockages you find. You can also have a blocked drainage.

  1. My washing machine is filled with water when left alone.

This is usually caused by the drainage being blocked or the nail is incorrectly mounted. If the machine is connected under the sink, make sure that the bracket is facing upwards. This will stop the machine from recharging the machine. Check your drain for blockages as well.

  1. My washing machine will not spin at all.

This is often a breast problem. If the machine is older than 3 years, the brushes may have worn out. They can also carry out earlier if the machine has been excessive use. Brushes are a cheap repair but need to be adapted by someone who is qualified.


If you have an oven that does not properly meet your requirements, check the list here to see how difficult it may be to fix your device that works incorrectly and perform oven repair! Keep in mind that ovens are HAZARDOUS and you could better fit by getting a trained professional to serve the oven.

  1. The oven does not light up.

First check fuses and that the appliance has power to it. This can be done with a non-voltage probe or see if something else is turned off from the same circuit. If the device still does not work, it may be an overheating state inside. Please do not replace statistics yourself if you are not sure about your abilities. If you use an incorrectly classified state, you may cause a fire.

  1. The timer does not work.

This can be caused by a lot of things, if you want this repaired, contact us for an oven repair quote because there are no user-friendly items here. However, they can often be easily replaced or repaired by a qualified technician. If you share the source yourself, be careful and be careful so that you can easily connect the wires inside the timer incorrectly and cause serious damage.

  1. The oven is not heated

This is usually a back-up overheating state or an oven element. This is not a repair that can be done by yourself because placement of the element is crucial so as not to damage the oven or the insulation.

Ovens are simple machines with small or no user-friendly parts for oven repair. This is unfortunate but also an important safety factor. It depends on the heat factors involved in an oven. Parts can easily be damaged or misplaced by a trained person.

Home | Privacy Policy | Contact Us

© Copyright 2020